Products

   
Engine Flush and Cleaner


  • Cleans the inside of your engine oil circuit by removing carbon, sludge and varnish residues
  • Keeps new engine oil cleaner for longer
  • Neutralises harmful engine acids, prolonging engine life
  • Increases engine performance
  • Improves fuel consumption
  • Reduces exhaust emissions
  • Compatible with all mineral and synthetic based engine oils
Cleaner for all petrol and diesel engines with or without catalyst

The oil found in today's motor vehicles differs dramatically to the lubricants used 10 years ago. Synthetic and semi synthetic oil now seems to be used in the majority of new vehicles.

This type of oil keeps its viscosity longer and prevents "black sludge" building up, however, one apparent weakness of this new generation oil is it is not as soluble as the old mineral oil so it does not absorb the by-products of combustion (dirt and particles) as well.

If these particles are left to build up they could start to clog the oil thus starving the engine of vital oil that can lead to premature wear and component failure.

So there is still very much a need for Würth Engine Flush and Cleaner.

  • An agent to thin old oil, breaking down sludge and particle build up to ensure maximum drainage.
  • A detergent to clean away residue and unclog oil ways, galleries and neutralise crankcase acids.
  • A lubricant, (organic molybolan compound) to protect the engine while the solvents and detergents are cleaning.
  • Newly developed concentrated agent for dirty engines or old oil
    Your advantages:
    • New oil remains effective and clean longer.
    • Loosens dirt and sludge deposits inside the engine.
    • Dirt is effectively removed when used oil is drained
  • Contains surfactants with a strong detergent action
    Your advantage:
    • Cleans and flushes the entire engine oil circuit
Uses / Areas of Use:
  • If black sludge is suspected.
  • If hydraulic tappets chatter.
  • If the oil change is overdue.
  • In the event of a loss of compression from sticking piston rings.
  • For all mineral and synthetic based engine oils.
Application

Before changing the oil, ensure the oil level is within the normal operating range and the engine is warm. Add the contents and run engine for 10 minutes, then immediately change oil and filter.

Dosage

400ml is sufficient for 3 to 6 litres of motor oil.

Würth Article Numbers:

Engine Flush & Cleaner (400ml) 0893 558

Filling Hose 0891 565